Author: Seymour Safety

Safety Tip of the Week – Arc Flash Safety

Safety Tip of the Week – Arc Flash Safety

Arc Flash Safety Simply put, an arc flash is a phenomenon where a flashover of electric current leaves its intended path and travels through the air from one conductor to another or to ground. The results are often violent and when a human is in close proximity to the arc...

Weekly Safety Meeting – Portable Fire Extinguishers

Weekly Safety Meeting – Portable Fire Extinguishers

Portable Fire Extinguishers In the event of a fire, the correct use of a portable fire extinguisher could mean the difference between suffering a minor loss or a major one. Portable fire extinguishers, if used properly, can make that difference. But there are several things to consider in using fire...

Safety Tip of the Week – Frostbite

Safety Tip of the Week – Frostbite

Frostbite Low temperatures, humidity, and wind velocity all are contributing factors to overexposure from the cold. Usually the victim is unaware of frostbite until someone else observes the pale, glossy skin. Frostbite results when crystals form, either superficially or deeply in the fluids and soft tissues of the skin. Frostbite...

Weekly Safety Meeting – Frostbite

Weekly Safety Meeting – Frostbite

Frostbite During winter, many of us will continue to work outdoors, exposed to inclement weather. Just as heatstroke is a serious problem in the summer, frostbite can cause serious injury in the winter. It is important to be able to recognize frostbite symptoms and protect yourself from this serious condition....

Weekly Safety Meeting – GFCI

Weekly Safety Meeting – GFCI

Ground-Fault Circuit-Interrupters (GFCI) The most common electric shock hazard, ground faults, can cause severe electrical shock or electrocution. In normal conditions, electricity runs in a closed circuit; electricity flows out on the “hot” wire and returns on the “neutral” wire, completing the circuit. A ground fault occurs when the electrical...

Safety Tip of the Week – GFCI

Safety Tip of the Week – GFCI

Ground-Fault Circuit-Interrupters (GFCI) A ground fault occurs when the electrical current does not complete its circuit and unintentionally flows to the ground. Ground faults can cause fires and are dangerous when they flow through a person to the ground. The GFCI, as it is commonly called, is simply a fast-acting...

Safety Tip of the Week – Care for Your Respirator

Safety Tip of the Week – Care for Your Respirator

Care for Your Respirator Your respirator may be the most important tool of your job. It protects your most precious asset, your health. Yet, more often than not, respirators find their way to the bottom of tool bags where they become damaged and/or very dirty inside and out. Both of...

Weekly Safety Meeting – Care for Your Respirator

Weekly Safety Meeting – Care for Your Respirator

Care for Your Respirator OSHA requires employers to identify and protect against breathing hazards. Engineering controls are the preferred form of protection; e.g., ventilation, using less toxic measures, and enclosing operations that create air contaminants. When air measurements reveal that engineering controls haven’t brought air hazards to safe levels, employers...

Weekly Safety Meeting – Machine Safety

Weekly Safety Meeting – Machine Safety

Machine Safety According to the Bureau of Labor Statistics, over 1100 workers in the United States were killed last year by contact with equipment or by being caught up in running machinery. That’s 20% of all fatalities in the workplace. Over a thousand people killed in ways that could have...