Many workers are injured every year due to slips, trips, or falls generated by improper walking and working surfaces. Most of these accidents can be prevented if proper safety precautions are initiated. Slips, trips, and falls can be caused by conditions such as ice, standing water, grease, polished floors, loose...
Falls represent the number one preventable cause of injury and death in the workplace. More than a million people suffer injuries and more than 16,000 people die as a result of falls in any given year. Obvious injuries occur from falls from six feet or more, but about 60 percent...
OSHA requires employers to identify and protect against breathing hazards. Engineering controls are the preferred form of protection, e.g., ventilation, using less toxic measures, and enclosing operations that create air contaminants. When air measurements reveal that engineering controls haven’t brought air hazards to safe levels, employers must provide employees with...
Your respirator may be the most important tool of your job. It protects your most precious asset— your health. Yet, more often than not, respirators find their way to the bottom of tool bags where they become damaged and/or very dirty inside and out. Both of these conditions compromise the...
Air that’s contaminated or lacks oxygen can be very harmful to your health. Inhaling chemical vapors, gases, or fumes and dust can irritate and even seriously damage the lungs, respiratory systems, or other organs, sometimes fatally. Lack of oxygen can cause death in minutes. Wear the respirator designed to protect...
Air that’s contaminated or lacks oxygen can be very harmful to your health. Inhaling chemical vapors, gases, or fumes and dust can irritate and even seriously damage the lungs, respiratory systems, or other organs, sometimes fatally. Respirator Basics: Respirators must always be inspected prior to donning. The inspection should check...
Nearly every type of work or occupation has the potential for causing work-related musculoskeletal disorders (WMSDs). Factors that Contribute to the Development of WMSDs Include: Force – the strength to perform a task; Repetition – the frequency or number of times a task is performed during a shift; Posture – positioning...
‘Ergonomics’ literally means “the rules of human strength.” Engineers interested in the design of work environments originated the word in the 1950s. Today, the purpose of ergonomics in the workplace is to create a better match between workers, the work they perform, and the equipment they use. A good match...