The Occupational Safety and Health Administration (OSHA) does not currently have a standard for the robotics industry. However, there is direction from the National Institute of Occupational Safety and Health (NIOSH), and many other organizations. Recommendations By NIOSH To minimize risks NIOSH offers the following recommendations regarding the design of...
The Occupational Safety and Health Administration (OSHA) does not currently have a designated standard for the robotics industry. However, we do have direction from the National Institute of Occupational Safety and Health (NIOSH), American National Standard Institute (ANSI), the International Organization for Standardization (ISO), Canadian Standards Association (CSA), and American...
According to the Centers for Disease Control and Prevention website, over 3 million United States employees in approximately 1.3 million workplaces are required to wear respiratory protection. The Occupational Safety and Health Administration Standard (29 CFR 1910.134) requires an annual fit test to confirm the fit of any respirator that...
According to the Occupational Safety and Health Standard 1910.134, respirator users should complete a seal check every time one wears a respirator to ensure an adequate seal is achieved. How Do We Complete a User Seal Check on a Filtering Facepiece Respirator? We prepare to wear our respirator by the...
According to the Occupational Safety and Health Standard 1910.134 Appendix B-2, respiratory cleaning procedures are indeed mandatory. Procedures for Cleaning Respirators Prepare your respirator for cleaning. Follow these steps: Remove filters, cartridges, or canisters, dissemble facepieces removing speaking diaphragms, demand and pressure-demand valves assemblies, hoses, or any components recommended by your respiratory protection...
According to the Occupational Safety and Health Standard 1910.134 Appendix B-2, respiratory cleaning procedures are mandatory. These procedures are provided for your employer to use when cleaning respirators. These procedures are general in nature, and your employer, as an alternative, may use the cleaning recommendations provided by the manufacturer of...
The accumulation of oil or solvent soaked rags in the normal daily functioning of a shop, manufacturing, or construction environment can be a major safety issue. Oil-soaked rags are a spontaneous combustion hazard because as the oil oxidizes, heat is released. If the heat is not dissipated, it can build...
The accumulation of oil or solvent soaked rags in the normal daily functions of a shop, manufacturing, or construction environment can be a major safety issue. Oil-soaked rags are a spontaneous combustion hazard because as the oil oxidizes, heat is released. If the heat is not dissipated, it can build...
In many industrial workplaces, people must work in areas where different substances can be present, some hazardous to their health. There are facilities where the level of oxygen and the number of toxic substances in the air could change at any time. These substances could create health hazards that cause...
In many industrial workplaces, people must work in areas where different substances can be present, some hazardous to their health. There are facilities where the level of oxygen and the number of toxic substances could change at any time. These toxic substances could create health hazards that affect different parts of the body, causing disease, and...